[Help_Pannel_3]
Total_Lines=3
Line_1=Enter the Customer Name from the e-mail containing the
Line_2=license key. Please make sure you enter only the string
Line_3=following the word CustomerName

[Help_Pannel_4]
Total_Lines=3
Line_1=Enter the License Key from the e-mail containing the
Line_2=license key. Please make sure you enter only the string
Line_3=following the word LicenseKey

[Help_Pannel_5]
Total_Lines=3
Line_1=Enter the IP Address from the e-mail containing the
Line_2=license key. Please make sure you enter only the string
Line_3=following the word IPAddress

[Help_Pannel_6]
Total_Lines=3
Line_1=Enter the SubNet Mask from the e-mail containing the
Line_2=license key. Please make sure you enter only the string
Line_3=following the word SubNetMask

[Help_Pannel_7]
Total_Lines=4
Line_1=You can install and use Real Server ONLY if you accept
Line_2=the terms of the License Agreement. Please review
Line_3=the agreement carefully and make sure you agree with
Line_4=all its terms.

[Help_Pannel_8]
Total_Lines=2
Line_1=This prints a summary of all features enabled by
Line_2=your Real Server license.

[Help_Pannel_9]
Total_Lines=5
Line_1=Please enter the full pathname of the directory to install
Line_2=Real Server. The pathname should begin with / for it 
Line_3=to be a valid name. Please make sure you have write permissions
Line_3=to the directory and that the directory has sufficient
Line_4=space to install all server binaries and additional space
Line_5=for any content. 

[Help_Pannel_10]
Total_Lines=7
Line_1=The IP Binding List controls which IP Addresses Real Server
Line_2=will attempt to bind to upon startup. Each IP Address in the
Line_3=list must fall within the range of IP Addresses permitted by
Line_4=the Licensed IP Address and Subnet Mask fields entered at
Line_5=the beginning of the installation.
Line_6=
Line_7=All four octets of the IP Address must be specified.

[Help_Pannel_11]
Total_Lines=11
Line_1=Address is the IP address of the computer allowed to
Line_2=access Real Server. All four octets of the address must be
Line_3=specified.
Line_4=
Line_5=Net mask is a mask that specifies the bits in the domain
Line_6=address that are treated as wildcards.  The bits in the IP
Line_7=address that correspond with the zeros in the net mask are 
Line_8=treated as wildcards. For example, an address of 
Line_9=121.23.101.0 with a net mask of 255.255.255.0 accepts all
Line_10=IP addresses from 121.23.101.0 to 121.23.101.255. Please
Line_11=refer to your Real Server manual for more information. 

[Help_Pannel_13]
Total_Lines=4
Line_1=The monitor password is the password that is used by the
Line_2=monitor to connect to Real Server. You can also change
Line_3=this password by editing the MonitorPassword parameter
Line_4=in your server.cfg file.

[Help_Pannel_14]
Total_Lines=4
Line_1=The Live Encoder password is the password that is used by 
Line_2=Live encoders to connect to Real Server. You can also change
Line_3=this password by editing the EncoderPassword parameter
Line_4=in your server.cfg file.

[Help_Pannel_15]
Total_Lines=4
Line_1=The Live File Archive password is the password that is used by 
Line_2=by Real Server to archive live broadcasts. You can also change
Line_3=this password by editing the LiveFilePassword parameter
Line_4=in your server.cfg file.

[Help_Pannel_16]
Total_Lines=5
Line_1=This is the number of the TCP port Real Server uses for
Line_2=receiving player requests. Any port number that is a
Line_3=valid port number can be used. To use port numbers
Line_4=less than 1024, you will need to have super-user
Line_5=privileges.

[Help_Pannel_17]
Total_Lines=4
Line_1=This is the full e-mail address of the system administrator
Line_2=who should receive error messages from Real Server. This
Line_3=parameter can also be modified by editing the MailMessageUser
Line_4=parameter in the server.cfg file.

[Help_Pannel_18]
Total_Lines=4
Line_1=This is the full hostname of the e-mail server that Real Server
Line_2=uses to send error messages. This parameter can also
Line_3=be modified by editing the MailMessageSMTPHost parameter
Line_4=in the server.cfg file.

[Help_Pannel_21]
Total_Lines=5
Line_1=This is the User ID that is used to run the Real Server
Line_2=on UNIX platforms. For best performance, you may 
Line_3=wish to run Real Server with super-user privileges. 
Line_4=This parameter can also be modified by editing the
Line_5=User parameter in the server.cfg file.

[Help_Pannel_22]
Total_Lines=5
Line_1=This is the Group ID that is used to run the Real Server
Line_2=on UNIX platforms. For best performance, you may 
Line_3=wish to run Real Server with super-user privileges. 
Line_4=This parameter can also be modified by editing the
Line_5=Group parameter in the server.cfg file.

[Help_Pannel_23]
Total_Lines=3
Line_1=This will make required directories (if necessary) for your
Line_2=Real Server installation and copy required binaries and other
Line_3=files to the appropriate destinations.